弯曲梁流变仪

弯曲梁流变仪(BBR)

The 弯曲梁流变仪(BBR) test provides a measure of the low temperature stiffness and relaxation properties of asphalt binders. These parameters give an indication of an asphalt binder’s ability to resist low temperature cracking. The BBR is engineered to perform flexural tests on asphalt binder and similar specimens per ASTM D6648 and AASHTO T313.

These tests consist of a constant force being applied to a specimen in a chilled bath in order to derive specific rates of deformation at various temperatures. The system consists of a fluid bath base unit, a three-point bending test apparatus which is easily removed from the base unit for specimen 加载 and un加载, an external cooling unit with temperature controller, a calibration hardware kit with carrying case, 一台PC和测试软件.

弯曲蠕变刚度的测定
The BBR System consists of a fluid bath base unit, a three-point bending test apparatus which is easily removed from the base unit for specimen 加载 and un加载, an external cooling unit with temperature controller, and a calibration hardware kit with carrying case. The system is supplied complete with PC and testing software.

This test method covers the determination of the flexural creep stiffness or compliance of asphalt mixtures by means of a bending beam rheometer. It is applicable to material having a flexuralstiffness value from 2 GPa to 20 GPa (creep compliance values in the range of 0.5npa - 1到0.05年npa-1). The test apparatus is designed for testing within the temperature range from –36 to 0°C.

洪堡弯曲梁流变仪
弯曲梁流变仪s from ATS are offered from 洪堡. Both are designed to measure the flexural creep stiffness of asphalt binder from ambient to -40°C to predict low-temperature thermal cracking of asphalt pavements. Special molds form small beam samples of binder for testing, and the deflection of the beam is recorded as a constant load is applied. 负载, 位移, and bath temperature are displayed in real-time via tabular and graphic forms.

Both models use an air-bearing system to ensure reliable 加载 with accurate and repeatable results. A linear variable 位移 transducer (LVDT) with a range of 6.35mm and accuracy of ±2µm measures deflection. The stainless steel three-point bend apparatus is easily removed and reinstalled in the base unit for convenient sample preparation and 加载.

A fluid bath controls the temperature of the Ethylene Glycol/Water/Methanol mixture down to -40°C (-40°F). Process temperature is controlled by two 独立的 platinum RTD temperature transducers to maintain stability. Both models fully comply with ASTM/AASHTO requirements. A source of clean, dry, compressed air at 50 PSIG minimum must be provided by the user.

H-1641T弯曲梁流变仪
The 弯曲梁流变仪 3 (BBR3) has been designed to perform flexural tests on asphalt binder and similar specimens as part of the PG grading system according to Superpave. BBR3是一个状态-
Programmable test parameters allow the user to define a test and save those parameters for later testing. Predefined test parameters include the standard ASTM BBR test, as well as the crack sealant test and the sliver test. The BBR3’s programmable test parameters include: Deflection Plot, 负荷图, 熔体温度, 搅拌器速度, 样本大小, 测试时间, 负载, 测试公司.

Programmable test parameters allow the user to define a test and save those parameters for later testing. Predefined test parameters include the standard ASTM BBR test, as well as the crack sealant test and the sliver test. The BBR3’s programmable test parameters include: Deflection Plot, 负荷图, 熔体温度, 搅拌器速度, 样本大小, 测试时间, 负载, 测试公司.

The BBR3 features a Displacement Transducer accuracy of 0.097微米，测量分辨率为0.006g，变形精度为0.097. While other BBR models may favor Peltier cooling, the BBR3 operates more efficiently without it. Reporting features on the new BBR3 include the ability to name your sample and enter any important notes. 用新的BBR3, your data is collected twice per second in addition to these new features, BBR3 users now also have the ability to upload their company logo directly into their test report.

H-1642弯曲梁流变仪
The unit features an integral, stainless steel load frame and in-line, blunt-point 加载 shaft. 大, 易于阅读的数字显示显示负载, 位移, and bath temperature for ease of setup and operation. 实时位移, 加载, and temperature graphs are displayed during the test cycle and can be re-plotted and re-scaled as needed for easy viewing.

The BBR uses a linear, variable-位移 transducer (LVDT) with a range of 6.35mm and accuracy to ±2mm measures deflection. The temperature-compensating 500g load cell with mechanical overload protection ensures accurate load results. 安全, rapid cooling of the ethylene glycol mixture test fluid to -40° to 25°C is provided by a mechanical refrigeration system. Process temperature is controlled and monitored by two, 独立的, platinum RTD temperature transducers maintaining temperature stability.